InSinkErator 11327G Manuál s instrukcemi stáhnout pdf

1. Place mounting flange (1) up over

existing sink bowl connection lip. It may

require a slight force fit.

2. Push mounting flange (1) up out of the

way and fit inside groove of mounting

gasket (2) onto the sink bowl

connection lip.

3. Move mounting flange (1) down over

mounting gasket (2). Be certain that the

threaded fasteners in the mounting

flange (1) fit into recesses in the top of

the mounting gasket (2).

4. Attach two screws (3) through opposite

holes in the mounting gasket (2), and

into the threaded fasteners in the

mounting flange (1). The screws (3)

should be protruding approximately

1/4 inch below the mounting gasket (2).

5. Position the disposer beneath the

mounting gasket (2) and engage the two

protruding screws in the keyhole slots

in the disposer body flange. Assemble

the remaining four screws (3) and turn

the disposer into place for plumbing

connections. Tighten all screws evenly

to secure the unit.

Mounting Adaptor (#11327-G)

(1) Mounting Flange

(#11004-C)

(2) Mounting Gasket

(#11341)

(3) Screw

(#1491)

Disposer

Body Flange

Threaded Fasteners

Sink Bowl

Connection Lip

Keyholes

Sink

Part No. 13966-G October 2007

This adaptor will fit a sink opening of: 7" I.D. and 7-3/8" O.D.

Installation Instructions

Mounting Adaptor (#11327-G) 1

Shrnutí obsahu

Strany 1 - Mounting Adaptor (#11327-G)

1. Place mounting flange (1) up over existing sink bowl connection lip. It may require a slight force fit.2. Push mounting flange (1) up out of

Komentáře k této Příručce

Žádné komentáře

InSinkErator 11327G Manuál s instrukcemi

Procházejte online nebo si stáhněte Manuál s instrukcemi pro ne InSinkErator 11327G. InSinkErator 11327G Instructions / Assembly Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro ne InSinkErator 11327G