InSinkErator 11327K Manuál s instrukcemi stáhnout pdf

1. Place the adaptor mounting flange (1) up

over the existing sink bowl connection

lip. It may require a slight force fit.

2. Push mounting flange (1) up out of the

way and fit inside groove of mounting

gasket (2) onto the sink bowl

connection lip.

3. Move mounting flange (1) down over

mounting gasket (2). Be certain that the

threaded fasteners in the mounting

flange (1) fit into recesses in the top of

the mounting gasket (2).

4. Attach two screws (5) through opposite

holes in the flat gasket (4), metal

support ring (3), mounting gasket (2)

and into the threaded fasteners in the

mounting flange (1). The screws (5)

should be protruding approximately

1/4 inch below the flat gasket (4).

5. Position the disposer beneath the flat

gasket (4) and engage the two protruding

screws in the keyhole slots in the disposer

body flange. Assemble the remaining

four screws (5) and turn the disposer

into place for plumbing connections.

Tighten all screws evenly to secure

the unit.

Mounting Adaptor (#11327-K)

Installation Instructions

13966-K REV A

(1) Mounting Flange

(#11004-E)

(4) Flat Gasket

(#11292)

(3) Metal

Support Ring

(#14726)

(5) Screw

(#1491)

(2) Mounting Gasket

(#11342)

Disposer

Body Flange

Threaded Fasteners

Sink Bowl

Connection Lip

Keyholes

Sink

This adaptor will fit a sink opening of: 6" I.D. and 6-7/8" O.D.

Mounting Adaptor (#11327-K) 1

Shrnutí obsahu

Strany 1 - Mounting Adaptor (#11327-K)

1. Place the adaptor mounting flange (1) up over the existing sink bowl connection lip. It may require a slight force fit.2. Push mounting flan

Komentáře k této Příručce

Žádné komentáře

InSinkErator 11327K Manuál s instrukcemi

Procházejte online nebo si stáhněte Manuál s instrukcemi pro ne InSinkErator 11327K. InSinkErator 11327K Instructions / Assembly Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro ne InSinkErator 11327K